HJ-800 computer high-precision transverse and longitudinal cutting machine
Performance and characteristics:
This machine is suitable for various types of paper and aluminum foil. This machine adopts servo motor control for fixed length cutting. The transmission system adopts centralized control such as pneumatic and photoelectric sensors. This machine integrates light, electricity, and gas, with simple operation, high cutting accuracy, mechanical stability, and low noise. (Optional for pneumatic feeding) Motor variable frequency speed regulation, automatic counting, alarm shutdown. It is currently an ideal equipment for high-quality large-scale sheet cutting in China
Features:
1. Host variable frequency speed regulation, Panasonic PLC touch screen control system, automatic counting, automatic length setting, alarm shutdown
2. The frame adopts a 16mm steel plate structure, the cross cutting blade seat adopts a heavy cast structure, and the guide roller adopts dynamic balance treatment aluminum alloy guide roller
3. The drive positioning traction adopts servo system drive shaft control, and the feeding traction method is motor driven sprocket drive traction
4. This machine is an ideal large-scale sheet material transverse and longitudinal cutting equipment with high accuracy, fast speed, and smooth material collection
1, Main technical parameters:
| Model |
HJ-800 |
| Maximum cutting width |
800mm |
| Cutting length |
20-600mm |
| Cutting speed |
5-150times/min |
| Horizontal and vertical accuracy |
±0.2mm
|
| Total power of power supply |
6.5kw |
| machine weight |
2000kg |
| External dimensions (L × W × H) |
L4500*W2000*H1400 |
2, Machine configuration:
Host part
(5) The rack adopts 16 # high-quality steel plate structure
1) Traction device:
(1) Structural type: active traction passive compression type
(2) The traction base adopts a casting structure (1 set)
(3) The traction roller adopts rubber rollers (specification: 4 pieces) φ eighty-five × 850mm)
(4) The compression method adopts cylinder control
(5) The transmission guide roller adopts aluminum guide rollers (specification: 3 pieces) φ seventy-five × 850mm)
(6) The transmission guide roller can be tensioned up and down for adjustment
(7) The motor adopts a three-phase asynchronous variable frequency motor of 1.5KW (1 set)
(8) The frequency converter adopts 1.5kw Geetek (1 unit)
(9) Feeding is controlled by a conveyor belt
(10) The entire feeding mechanism is intelligently controlled by displacement sensors.
2) Feeding mechanism:
1. Actively adopt servo control positioning method
2. 3kw Inviton servo motor, driver (1 set)
3. The entire industrial control system adopts a digital industrial control system driving method: the main motor drives the active roller positioning
4. The transmission adopts synchronous belt and synchronous wheel transmission mechanism
5. The feeding roller adopts an upper and lower smooth rubber roller structure.
3) Cutting device:
(1) Cutting method: lower knife fixed, upper knife active cutting
(2) The cutterbed adopts a cast heavy structure:
(3) Linear guide rail (2 pairs)
(4) Oil container (2 pieces)
Lubricating oil can be recycled
(5) The upper and lower knives are made of imported balanced steel knives (2 pairs) with strip knives
(6) Tool (specification thick × wide × Length: 15 × eighty × 850mm)
(7) The longitudinal cutting round knife is made of high-quality steel (2 pairs)
(8) Operation method: Manually adjust the tool position
(9) Main transmission mode: The main motor transmission is matched with a gearbox to drive the eccentric wheel linkage, and the connecting rod reciprocates to move the cutting tool
(10) The main motor adopts a variable frequency speed control motor in Shanghai (1.5kw)
(11) The frequency converter adopts Geetek (1.5kw 1 unit)
(12) The transmission adopts a synchronous wheel transmission mechanism
(13) Eccentric wheel (2 sets)
(14) Connecting rod (2 pieces)
The material receiving platform adopts the automatic feeding function of conveyor belts;
(1) The number of finished sheets is controlled by Panasonic PLC, and the set number of sheets is automatically sent to the sorting area. The machine automatically runs normally, making it easy to operate and labor-saving
3. Electrical control part: (Control and host connected in parallel) The entire machine adopts Panasonic PLC industrial control system, and the touch screen is controlled by Taiwan Weilun
(1) The control system of this machine can be roughly divided into host control.
(2) Host control: including main motor control, traction control, feeding control, and cutting control.
(3) Equipped with an electronic meter counter for counting; Alarm shutdown; Automatic fixed length, point in and point out functions.
(4) The above electrical components are selected from Chint; Switch selected from Schneider brand
4. Supporting facilities: (user responsible)
(1) Electrical source: three-phase four wire air switch: voltage 380V/50Hz
Material discharge rack device;
Using a shaft discharge rack
Cylinder; 160 * 300 2 pieces
Guide rail; 2 sets for each of 20 * 280-20 * 420
Rectification; Adopting a set of simulated deviation correction
Magnetic particle; 10 kilograms, 1 piece
Distribution box; The frequency converter adopts two sets of Geely Tech 1.5kw
The servo driver adopts Shenzhen Yingweiteng 3kw 1 set
Chint is used as low-voltage apparatus and Omron is used as relay
PLC adopts Panasonic from Japan
Switching power supply adopts Taiwan Mingwei
Material discharge device; One set of automatic correction, one photoelectric correction
Servo brake 10 kg, 1 unit
Cylinder 160 * 300=2 pieces
Inflatable shaft 800 model, 3 inches, 1 piece
Material receiving platform; Automatic counting and feeding, materials are sent to the sorting area through conveyor belts.
| Name |
quantity |
Remarks |
| 10-12 open-end wrench |
1 set |
|
| Open end wrench |
1 set |
|
| Oil gun1 piece |
1 piece |
|
| Hex key |
1 set |
|
| Slotted screwdriver |
1 set |
|
| Cross screwdriver |
1 set |
|
| Double headed wrench |
1 set |
twelve × fourteen Specifications |
| Double headed wrench |
1 set |
fourteen × fourteen Specifications |
| Double headed wrench |
1 set |
twenty-two × twenty-four specifications |
| Rack horizontal pad |
6 |
|
| User Manual |
1 book |
|
| Circular blade |
6 pieces |
|
